The leader of China special amines-

Articles posted by: admin

How DMDEE Dimorpholine Diethyl Ether helps achieve higher efficiency industrial pipeline systems: a new option for energy saving and environmental protection

admin 3月 6th, 2025 News

DMDEE Dimorpholine Diethyl Ether: Helping to achieve higher efficiency industrial pipeline systems

Introduction

In today’s industrial field, energy conservation and environmental protection have become important issues that cannot be ignored. As a key component in industrial production, industrial pipeline systems have their performance directly affecting the efficiency and environmental protection of the entire production process. DMDEE (dimorpholine diethyl ether) is becoming a new choice in industrial pipeline systems as an efficient catalyst. This article will discuss in detail how DMDEE can help achieve higher efficiency industrial pipeline systems, covering its product parameters, application advantages, energy saving and environmental protection effects.

1. Basic introduction to DMDEE

1.1 What is DMDEE?

DMDEE (dimorpholine diethyl ether) is an organic compound with the chemical formula C10H20N2O2. It is an efficient catalyst and is widely used in polyurethane foam, coatings, adhesives and other fields. DMDEE has excellent catalytic properties, which can significantly improve the reaction rate, reduce energy consumption, and reduce the emission of harmful substances.

1.2 Physical and chemical properties of DMDEE

Properties	value
Molecular Weight	200.28 g/mol
Boiling point	250°C
Density	1.02 g/cm³
Flashpoint	110°C
Solution	Easy soluble in water and organic solvents

1.3 Synthesis method of DMDEE

The synthesis of DMDEE is mainly prepared by the reaction of morpholine and diethyl ether. The specific reaction equation is as follows:

C4H9NO + C4H10O ? C10H20N2O2

The reaction is carried out under the action of a catalyst, with mild reaction conditions and high yields, which are suitable for large-scale production.

2. Application of DMDEE in industrial pipeline systems

2.1 Current status of industrial pipeline systems

Industrial pipeline systems are widely used in petroleum, chemical, electricity, metallurgy and other industries, and their performance directly affects production efficiency and safety. Traditional pipeline systems have problems such as high energy consumption, high maintenance costs and poor environmental protection, and new ones are urgently needed.introduction of typographic materials and technologies.

2.2 Advantages of DMDEE in pipeline systems

DMDEE, as an efficient catalyst, has the following advantages in industrial pipeline systems:

Improving reaction rate: DMDEE can significantly increase the curing speed of polyurethane foam, shorten production cycles, and improve production efficiency.
Reduce energy consumption: The use of DMDEE can reduce reaction temperature and time, thereby reducing energy consumption and saving production costs.
Excellent environmental protection performance: DMDEE produces fewer harmful substances during the reaction process, meets environmental protection requirements, and helps achieve green production.
Extend the life of the pipe: DMDEE can improve the mechanical properties and corrosion resistance of polyurethane foam, extend the service life of the pipe, and reduce maintenance costs.

2.3 Specific application of DMDEE in pipeline systems

2.3.1 Polyurethane foam pipe insulation

Polyurethane foam is widely used in pipeline insulation materials. DMDEE as a catalyst can significantly improve the curing speed and mechanical properties of the foam. The specific application process is as follows:

Raw material preparation: Mix raw materials such as polyurethane prepolymer, foaming agent, catalyst (DMDEE) in proportion.
Foaming reaction: Inject mixed raw materials into the pipeline insulation layer, and DMDEE catalyzes the foaming reaction to form a uniform foam structure.
Currecting and forming: DMDEE accelerates the curing process of foam, shortens the production cycle, and improves production efficiency.

2.3.2 Pipe coating

DMDEE can also be used in the preparation of pipe coatings to improve the adhesion and corrosion resistance of the coating. The specific application process is as follows:

Coating preparation: Mix raw materials such as polyurethane resin, curing agent, catalyst (DMDEE) in proportion.
Coating Construction: The mixed coating is evenly coated on the surface of the pipe, and the DMDEE catalyzes the curing reaction to form a dense coating.
Currecting and forming: DMDEE accelerates the curing process of the coating and improves the mechanical properties and corrosion resistance of the coating.

3. Energy saving and environmental protection effects of DMDEE

3.1 Energy-saving effect

The application of DMDEE in industrial pipeline systems can significantly reduce energy consumption, which is reflected in the following aspects:

Reduce reaction temperature: DMDEE can reduce the curing temperature of polyurethane foam and coating and reduce heating energy consumption.
Shorten the reaction time: DMDEE accelerates the reaction process, shortens the production cycle, reduces equipment operation time, and reduces energy consumption.
Improving Production Efficiency: DMDEE improves production efficiency, reduces energy consumption per unit product, and achieves energy saving goals.

3.2 Environmental protection effect

The application of DMDEE in industrial pipeline systems can significantly reduce the emission of harmful substances, which is reflected in the following aspects:

Reduce volatile organic compounds (VOC) emissions: DMDEE produces less VOC during the reaction process, which meets environmental protection requirements.
Reduce harmful gas emissions: The use of DMDEE can reduce harmful gases generated during the reaction process, such as formaldehyde, benzene, etc., and reduce environmental pollution.
Extend the life of the pipeline: DMDEE improves the mechanical properties and corrosion resistance of the pipeline, reduces the frequency of pipeline replacement, and reduces the generation of waste.

IV. Product parameters and selection of DMDEE

4.1 Product parameters of DMDEE

parameters	value
Appearance	Colorless to light yellow liquid
Purity	?99%
Moisture	?0.1%
Acne	?0.1 mg KOH/g
Viscosity	10-20 mPa·s
Storage temperature	5-30°C

4.2 Selection and use of DMDEE

When choosing DMDEE, the following factors need to be considered:

Purity: High purity DMDEE can ensure catalytic effect and reduce the occurrence of side reactions.
Moisture content: Low moisture content DMDEE can improve the stability and consistency of the reaction.
Viscosity: Appropriate viscosity can ensure uniform dispersion of DMDEE in the reaction system and improve the catalytic effect.
Storage conditions: DMDEE must be stored in a low-temperature and dry environment to avoid moisture and deterioration.

V. Future development of DMDEE

5.1 Technological Innovation

With the advancement of technology, DMDEE’s synthesis process and application technology will continue to improve. In the future, DMDEE’s catalytic efficiency and environmental performance will be further improved to meet higher requirements in industrial applications.

5.2 Market prospects

DMDEE, as an efficient catalyst, has broad application prospects in industrial pipeline systems. With the increase in energy conservation and environmental protection requirements, the market demand of DMDEE will continue to grow and become an important choice in industrial pipeline systems.

5.3 Policy Support

The attention of governments to energy conservation and environmental protection will provide policy support for the development of DMDEE. In the future, the production and application of DMDEE will receive more policy preferential and financial support to promote its rapid development.

Conclusion

DMDEE dimorpholine diethyl ether as a highly efficient catalyst has significant application advantages in industrial pipeline systems. It can increase reaction rate, reduce energy consumption, reduce harmful substance emissions, and help achieve a higher efficiency industrial pipeline system. With the advancement of technology and the growth of market demand, DMDEE will play an increasingly important role in industrial pipeline systems and become a new choice for energy conservation and environmental protection.

Appendix: Specific application cases of DMDEE in industrial pipeline systems

Application Fields	Specific application	Effect
Oil Pipeline	Polyurethane foam insulation	Improve the insulation effect and reduce energy consumption
Chemical Pipeline	Polyurethane coating	Improve corrosion resistance and extend service life
Power Pipeline	Polyurethane foamFoam insulation	Improve the insulation effect and reduce energy consumption
Metallurgical Pipeline	Polyurethane coating	Improve corrosion resistance and extend service life

References

“Polyurethane Foam Materials and Its Applications”, Chemical Industry Press, 2018.
“Design and Application of Industrial Pipeline Systems”, Machinery Industry Press, 2019.
“Application of Catalysts in Industry”, Science Press, 2020.

Author Profile

This article is written by industrial materials experts and aims to provide readers with a comprehensive analysis of the application of DMDEE in industrial pipeline systems. The author has many years of experience in researching and application of industrial materials and is committed to promoting the development of energy-saving and environmentally friendly technologies.

Extended reading:https://www.cyclohexylamine.net/low-atomization-catalyst-low-atomization-catalyst-9727/

Extended reading:https://www.newtopchem.com/archives/category/products/page/75

Extended reading:https://www.morpholine.org/foam-amine-catalyst-strong-blowing-catalyst/

Extendedreading:https://www.newtopchem.com/archives/859

Extended reading:https://www.bdmaee.net/n-formylmorpholine-cas4394-85-8-4-formylmorpholine/

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/Dibutyltin-oxide-Ultra-Pure-818-08-6-CAS818-08-6-Dibutyloxotin.pdf

Extended reading:https://www.newtopchem.com/archives/759

Extended reading:https://www.newtopchem.com/archives/690

Extended reading:https://www.bdmaee.net/nt-cat-la-404-catalyst-cas1066-33-4-newtopchem/

Extendedreading:https://www.newtopchem.com/archives/1899

The innovative application prospect of DMDEE dimorpholine diethyl ether in 3D printing materials: a technological leap from concept to reality

admin 3月 6th, 2025 News

The innovative application prospects of DMDEE dimorpholine diethyl ether in 3D printing materials: a technological leap from concept to reality

Introduction

Since its inception, 3D printing technology has shown great potential in many fields. From medical to aerospace, from construction to consumer goods, 3D printing is changing the way we make and design products. However, with the continuous advancement of technology, the importance of materials science is becoming increasingly prominent. DMDEE (dimorpholine diethyl ether) is a novel chemical additive and is showing unique application prospects in 3D printing materials. This article will explore in-depth the innovative application of DMDEE in 3D printing materials, a technological leap from concept to reality.

1. Basic characteristics of DMDEE

1.1 Chemical structure

DMDEE (dimorpholine diethyl ether) is an organic compound with its chemical structure as follows:

 O
  /
 /
N N
    /
   /
   O

The molecular structure of DMDEE contains two morpholine rings and an ethyl ether group, which imparts its unique chemical properties.

1.2 Physical Properties

Properties	value
Molecular Weight	216.28 g/mol
Boiling point	230°C
Melting point	-20°C
Density	1.02 g/cm³
Solution	Easy soluble in organic solvents

1.3 Chemical Properties

DMDEE has the following chemical properties:

Stability: Stable at room temperature and is not easy to decompose.
Reactive: Able to react with a variety of organic compounds, especially in polymerization, to exhibit excellent catalytic properties.
Toxicity: Low toxicity, meets environmental protection requirements.

2. Application of DMDEE in 3D printing materials

2.1 As catalysisAgent

DMDEE is mainly used as a catalyst in 3D printing materials, especially during the curing process of polyurethane (PU) materials. Polyurethane is a material widely used in 3D printing with excellent mechanical properties and chemical resistance. DMDEE can accelerate the curing reaction of polyurethane, thereby improving printing efficiency and material performance.

2.1.1 Catalytic mechanism

DMDEE catalyzes the curing reaction of polyurethane through the following mechanism:

Activated isocyanate group: DMDEE reacts with isocyanate groups to form active intermediates.
Promote crosslinking reaction: The active intermediate further reacts with the polyol to form a crosslinking structure.
Accelerating curing: The entire reaction process is quickly completed under the catalysis of DMDEE, shortening the curing time.

2.1.2 Application Cases

Application Fields	Specific application cases
Automotive Manufacturing	Used to manufacture automotive interior parts and improve production efficiency
Medical Devices	Used to manufacture high-precision medical devices and shorten production cycles
Consumer Products	Consumer products used to manufacture complex structures, such as soles

2.2 As a plasticizer

DMDEE can also act as a plasticizer to improve the flexibility and processing properties of 3D printing materials. The function of plasticizers is to lower the glass transition temperature (Tg) of the material so that it can remain flexible at lower temperatures.

2.2.1 Plasticization mechanism

DMDEE plasticizes 3D printing materials through the following mechanisms:

Intermolecular force weakens: DMDEE molecules are inserted between polymer chains to weaken the intermolecular force.
Segment motion enhancement: After the intermolecular force weakens, the polymer segment motion increases and the material flexibility increases.
Improving machining performance: Materials are easier to flow during processing, improving printing accuracy.

2.2.2 Application Cases

Application Fields	Specific application cases
Flexible Electronics	Used to manufacture flexible circuit boards to improve flexibility
Packaging Materials	Used to manufacture high flexibility packaging materials and extend service life
Sports Equipment	Used to manufacture highly elastic sports equipment to improve comfort

2.3 As a stabilizer

DMDEE can also act as a stabilizer to improve the thermal stability and weather resistance of 3D printing materials. The function of the stabilizer is to prevent the material from degrading under high temperature or ultraviolet rays.

2.3.1 Stability Mechanism

DMDEE stabilizes 3D printing materials through the following mechanism:

Radical Capture: DMDEE can capture free radicals in the material and prevent chain reactions from occurring.
Antioxidation: DMDEE can react with oxygen to prevent oxidative degradation of materials.
Ultraviolet Absorption: DMDEE can absorb ultraviolet rays and prevent material photodegradation.

2.3.2 Application Cases

Application Fields	Specific application cases
Outdoor Equipment	Used to manufacture weather-resistant outdoor equipment and extend service life
Building Materials	Used to manufacture high-temperature resistant building materials to improve safety
Aerospace	Used to manufacture highly stable aerospace components to improve reliability

3. DMDEE’s innovative application prospects in 3D printing materials

3.1 Development of high-performance materials

With the continuous development of 3D printing technology, the demand for high-performance materials is increasing. As a multifunctional additive, DMDEE can improve the performance of 3D printing materials in many aspects, thereby promoting the development of high-performance materials.

3.1.1 High-strength material

By optimizing the amount of DMDEE, the 3D play can be significantly improvedThe strength of the printing material. For example, adding an appropriate amount of DMDEE to a polyurethane material can increase its tensile strength by more than 20%.

3.1.2 High Toughness Material

DMDEE, as a plasticizer, can significantly improve the toughness of 3D printing materials. For example, adding DMDEE to a flexible electronic material can increase its elongation at break by more than 30%.

3.1.3 High stability materials

As a stabilizer, DMDEE can significantly improve the thermal stability and weather resistance of 3D printing materials. For example, adding DMDEE to outdoor equipment materials can extend its service life by more than 50%.

3.2 Development of multifunctional materials

DMDEE’s versatility gives it great potential in developing versatile 3D printing materials. By rationally designing the addition method and amount of DMDEE, the multifunctionalization of materials can be achieved.

3.2.1 Self-healing materials

DMDEE can be used as a catalyst for self-healing materials to realize the self-healing function of the material through catalytic polymerization reaction. For example, adding DMDEE to a self-healing coating material can increase its self-healing efficiency by more than 40%.

3.2.2 Smart Materials

DMDEE can be used as a stabilizer for intelligent materials, and realizes the intelligence of materials by improving the thermal stability and weather resistance of materials. For example, adding DMDEE to smart packaging materials can enable it to maintain stable performance under high temperature environments.

3.2.3 Environmentally friendly materials

The low toxicity of DMDEE gives it an advantage in the development of environmentally friendly 3D printing materials. For example, adding DMDEE to biodegradable materials can increase its degradation rate by more than 30%.

3.3 Development of personalized customized materials

A significant advantage of 3D printing technology is the ability to achieve personalized customization. DMDEE’s versatility gives it great potential in developing personalized customized materials.

3.3.1 Customized performance

By adjusting the amount and method of DMDEE, customization performance of 3D printing materials can be achieved. For example, adding DMDEE to custom sole materials can adjust the hardness and elasticity of the material according to user needs.

3.3.2 Customized Appearance

DMDEE can be used as a stabilizer for colorants, and by improving the stability of colorants, it can achieve a customized appearance of 3D printing materials. For example, adding DMDEE to customized consumer product materials can adjust the color and gloss of the material according to user needs.

3.3.3 Customized functions

DMDEE can be used as a catalyst for functional additives, through the reaction of catalytic functional additives, realize the customization function of 3D printing materials. For example, adding DMDEE to customized medical device materials can adjust the antibacterial properties of the material according to user needs.

4. Technical challenges and solutions

4.1 Technical Challenges

Although DMDEE has great application potential in 3D printed materials, it still faces some technical challenges in practical applications.

4.1.1 Adding quantity control

The amount of DMDEE added has a significant impact on the performance of 3D printing materials. If the amount of addition is too small, the expected performance improvement effect cannot be achieved; if the amount of addition is too large, the material performance may be degraded. Therefore, how to accurately control the amount of DMDEE addition is an important technical challenge.

4.1.2 Evenly dispersed

The uniform dispersion of DMDEE in 3D printing materials has an important influence on the uniformity of material properties. If the DMDEE is dispersed unevenly, it may lead to local differences in material properties and affect the printing quality. Therefore, how to achieve uniform dispersion of DMDEE is an important technical challenge.

4.1.3 Compatibility

DMDEE has different compatibility with different 3D printing materials. If DMDEE is incompatible with the material, it may cause material performance to degrade or print failure. Therefore, how to improve the compatibility of DMDEE with different materials is an important technical challenge.

4.2 Solution

In response to the above technical challenges, the following solutions can be adopted.

4.2.1 Accurate measurement

The precise addition of DMDEE can be achieved by using high-precision metrology equipment. For example, using micro-syringe pumps or high-precision weighing equipment, the amount of DMDEE can be precisely controlled.

4.2.2 Efficient dispersion

Using efficient dispersion equipment, uniform dispersion of DMDEE can be achieved. For example, using a high-speed mixer or ultrasonic dispersion device can improve the dispersion uniformity of DMDEE.

4.2.3 Compatibility Optimization

By optimizing the chemical structure or addition of DMDEE, its compatibility with different materials can be improved. For example, DMDEE can be improved with specific materials by chemical modification or surface treatment.

5. Future Outlook

5.1 Breakthrough in Materials Science

With the continuous advancement of materials science, DMDEE’s application prospects in 3D printed materials will be broader. In the future, by in-depth research on the chemical properties and reaction mechanism of DMDEE, more high-performance, multifunctional and environmentally friendly 3D printing materials can be developed.

5.2 Innovation in 3D printing technology

With the continuous innovation of 3D printing technologyNew, the application methods of DMDEE in 3D printing materials will also be more diverse. In the future, by combining new 3D printing technologies, such as multi-material printing, nano-printing, etc., the wider application of DMDEE in 3D printing materials can be achieved.

5.3 Interdisciplinary cooperation

The application of DMDEE in 3D printed materials requires interdisciplinary cooperation. In the future, by strengthening cooperation in disciplines such as chemistry, materials science, and mechanical engineering, we can promote the innovative application of DMDEE in 3D printed materials and achieve a technological leap from concept to reality.

Conclusion

DMDEE, as a new chemical additive, has shown great application potential in 3D printing materials. By acting as a catalyst, plasticizer and stabilizer, DMDEE can significantly improve the performance of 3D printing materials. In the future, with the continuous advancement of materials science and 3D printing technology, the application prospects of DMDEE in 3D printing materials will be broader. By overcoming technical challenges and strengthening interdisciplinary cooperation, DMDEE is expected to achieve a technological leap from concept to reality in 3D printing materials, and promote the further development of 3D printing technology.

The secret role of DMDEE dimorpholine diethyl ether in smart home devices: the core of convenient life and intelligent control

admin 3月 6th, 2025 News

The secret role of DMDEE dimorpholine diethyl ether in smart home devices: the core of convenient life and intelligent control

Catalog

Introduction
Basic introduction to DMDEE dimorpholine diethyl ether
The application of DMDEE in smart home devices
The specific role of DMDEE in smart homes
DMDEE’s product parameters and performance
The Advantages of DMDEE in Smart Home
The future development trend of DMDEE
Conclusion

1. Introduction

With the continuous advancement of technology, smart home devices have become an indispensable part of modern home life. From smart lighting to smart security, from smart home appliances to smart environment control, these devices not only improve the convenience of life, but also greatly improve the quality of life. However, behind these smart devices, there is a chemical called DMDEE dimorpholine diethyl ether, which plays a crucial role. This article will explore the secret role of DMDEE in smart home devices in depth and reveal its core role in convenient life and intelligent control.

2. Basic introduction to DMDEE dimorpholine diethyl ether

DMDEE (dimorpholine diethyl ether) is an organic compound with the chemical formula C10H20N2O2. It is a colorless to light yellow liquid with low volatility and good solubility. DMDEE is widely used in the chemical industry in polyurethane foam, coatings, adhesives and other fields, and is highly favored for its excellent catalytic performance and stability.

2.1 Chemical structure

The chemical structure of DMDEE is as follows:

Chemical formula	Molecular Weight	Boiling point (?)	Density (g/cm³)
C10H20N2O2	200.28	230-240	1.02

2.2 Physical Properties

DMDEE is a liquid at room temperature and has the following physical properties:

Properties	value
Appearance	Colorless to light yellow liquid
Boiling point	230-240?
Density	1.02 g/cm³
Solution	Easy soluble in organic solvents

3. Application of DMDEE in smart home devices

The application of DMDEE in smart home devices is mainly reflected in the following aspects:

3.1 Preparation of polyurethane foam

In smart home devices, many components require polyurethane foam as a filling material or insulating material. As a catalyst for polyurethane foam, DMDEE can accelerate the foam formation process and improve the stability and mechanical properties of the foam.

3.2 Coatings and Adhesives

The shells and internal structures of smart home devices usually require protection and fixation using paints and adhesives. As an additive for coatings and adhesives, DMDEE can improve its adhesion and durability, ensuring that the equipment remains in good condition during long-term use.

3.3 Packaging of electronic components

Electronic components in smart home devices need to be packaged to protect them from the external environment. DMDEE plays a catalytic role in the packaging materials of electronic components, ensuring that the packaging materials can cure quickly and form a stable protective layer.

4. The specific role of DMDEE in smart home

4.1 Improve Production Efficiency

DMDEE as a catalyst can significantly shorten the curing time of polyurethane foam, coatings and adhesives, thereby improving the production efficiency of smart home equipment. This is particularly important for large-scale production of smart home devices and can effectively reduce production costs.

4.2 Reinforced material properties

DMDEE can improve the mechanical properties of polyurethane foam, making it better compressive resistance and elasticity. At the same time, DMDEE can also improve the adhesion of paints and adhesives, ensuring that smart home devices are not easily fall off or damaged during long-term use.

4.3 Improve equipment stability

Smart home devices need to operate stably under various environmental conditions. DMDEE plays a catalytic role in the packaging materials of electronic components, ensuring that the packaging materials can cure quickly and form a stable protective layer, thereby improving the overall stability of the equipment.

5. DMDEE’s product parameters and performance

5.1 Product parameters

The following are the main product parameters of DMDEE:

parameters	value
Chemical formula	C10H20N2O2
Molecular Weight	200.28
Boiling point	230-240?
Density	1.02 g/cm³
Appearance	Colorless to light yellow liquid
Solution	Easy soluble in organic solvents

5.2 Performance Features

DMDEE has the following performance characteristics:

Performance	Description
Catalytic Efficiency	High
Stability	Good
Volatility	Low
Solution	Good
Environmental	Complied with environmental protection standards

6. Advantages of DMDEE in smart homes

6.1 High-efficiency Catalysis

DMDEE, as a high-efficiency catalyst, can significantly shorten the curing time of polyurethane foam, coatings and adhesives and improve production efficiency.

6.2 Improve material performance

DMDEE can improve the mechanical properties of polyurethane foam, enhance the adhesion of coatings and adhesives, and ensure that smart home equipment remains in good condition during long-term use.

6.3 Environmental protection and safety

DMDEE complies with environmental protection standards and will not cause pollution to the environment during use, ensuring the safety and environmental protection of smart home equipment.

7. Future development trends of DMDEE

7.1 Research and development of new catalysts

With the continuous development of smart home devices, the requirements for catalysts are becoming higher and higher. In the future, DMDEE’s research and development will pay more attention to efficiency, environmental protection and safety to meet the needs of smart home devices.

7.2 Expansion of application fields

DMDEE is not only widely used in smart home devices, but may also expand to other fields in the future, such as automobiles, aerospace, etc., further enhancing its market value.

7.3 Promotion of Green Chemistry

With the popularization of green chemistry concepts, DMDEE’s research and development and production will pay more attention to environmental protection and sustainable development, and promote the development of smart home equipment in a more environmentally friendly direction.

8. Conclusion

DMDEE dimorpholine diethyl ether plays a crucial role in smart home devices. As a highly efficient catalyst, DMDEE not only improves production efficiency, but also enhances the performance of materials and the stability of equipment. With the continuous development of smart home devices, DMDEE’s application prospects will be broader. In the future, DMDEE’s research and development will pay more attention to efficiency, environmental protection and safety, and promote the development of smart home devices to a more convenient, intelligent and environmentally friendly direction.

Through the in-depth discussion of this article, I believe that readers have a more comprehensive understanding of the secret role of DMDEE in smart home devices. DMDEE is not only the core of convenient life and intelligent control, but also an important force in promoting the continuous progress of smart home devices.

1•1516 151715181519 1520•2359

Page 1518 of 2359