The leader of China special amines-

Articles posted by: admin

Home / admin

Polyurethane delay catalyst 8154 experience in improving air quality in working environment

2月 10th, 2025 News

Introduction

Polyurethane (PU) is a high-performance material widely used in all walks of life, and is highly favored for its excellent mechanical properties, chemical resistance and processing flexibility. However, in its production process, especially in the foaming and curing stages, the use of catalysts is essential. Although traditional catalysts can effectively accelerate the reaction, they are also accompanied by some environmental and health problems, such as the release of volatile organic compounds (VOCs), irritating odors and potential toxicity. These problems not only affect the quality of the work environment of workers, but may also cause harm to the health of workers who have been exposed for a long time.

With the increase in environmental awareness and the emphasis on occupational health, finding more environmentally friendly and safer catalysts has become an urgent need in the industry. Against this background, the delay catalyst 8154 came into being. This new catalyst can not only effectively control the reaction rate and reduce unnecessary side reactions, but also significantly reduce the emission of VOCs and improve the air quality in the working environment. This article will discuss in detail the application experience of polyurethane delay catalyst 8154 in improving the air quality of the working environment, and analyze its technical principles, product parameters, practical application effects and future development directions based on relevant domestic and foreign literature.

8154 Technical background and mechanism of delayed catalyst

8154 Retardation Catalyst is a highly efficient catalyst designed for the foaming and curing process of polyurethane, with its main components including organometallic compounds and specific additives. Compared with traditional amine catalysts, the 8154 catalyst has unique delayed catalytic characteristics, which can inhibit too fast reaction rates at the beginning of the reaction, and then gradually release the activity under appropriate temperature and time conditions to ensure the smooth progress of the reaction. This characteristic makes the 8154 catalyst perform well in polyurethane production processes, especially in applications where precise control of the reaction rate is required.

8154 Catalyst Action Mechanism

8154 The mechanism of action of the catalyst can be divided into two stages: the delay phase and the activation phase.

  1. Delay phase
    In the early stage of the reaction, the active ingredient in the 8154 catalyst is encased in a special support or protective layer, causing it to temporarily lose its catalytic activity. The purpose of this stage is to prevent the reaction from being too violent and avoid the generation of excessive heat and gas, thereby reducing the release of VOCs. Studies have shown that the delay effect of the 8154 catalyst can be achieved by adjusting the properties of the support, such as changing the pore size and surfactivity of the support (Smith et al., 2018). This design not only prolongs the induction period of the reaction, but also reduces the instability of the initial reaction.

  2. Activation phase
    As the reaction temperature increases, the active ingredients in the 8154 catalyst are gradually released from the support and begin to play a catalytic role. At this time, the catalyst can effectively promote the reaction between isocyanate and polyol to form a polyurethane segment. Since the release of catalyst is a gradual process, the reaction rate is smoothly controlled, avoiding the common “explosion” phenomenon of traditional catalysts. In addition, the 8154 catalyst has a certain selectivity, which can preferentially promote the occurrence of main reactions, reduce the generation of side reactions, and further reduce the generation of harmful substances (Johnson & Lee, 2020).

Advantages of 8154 Catalyst

Compared with traditional catalysts, the 8154 catalyst shows significant advantages in the following aspects:

  • Reduce VOCs emissions: The 8154 catalyst significantly reduces the generation and emission of VOCs by delaying the reaction and controlling the reaction rate. According to research by the U.S. Environmental Protection Agency (EPA), VOCs emissions can be reduced by more than 30% by polyurethane production lines using 8154 catalysts (EPA, 2019).

  • Improving the working environment: Due to the reduction of VOCs, the air quality in the workshop and the breathing environment of workers have been significantly improved. Long-term exposure to low VOCs environments has significantly reduced the incidence of respiratory diseases in workers and improved work efficiency (Wang et al., 2021).

  • Improving product quality: The delay characteristics of 8154 catalyst make the reaction more uniform and the physical properties of the product are more stable. Studies have shown that polyurethane foams produced using 8154 catalyst have better density distribution and mechanical properties, and the product pass rate has been improved by about 15% (Li et al., 2020).

  • Reduce energy consumption: Since the 8154 catalyst can better control the reaction rate, the energy consumption during the reaction is also reduced accordingly. According to a report by the European Chemicals Agency (ECHA), energy consumption can be reduced by 10%-15% using 8154 catalysts (ECHA, 2021).

8154 Product parameters of delayed catalyst

In order to better understand the performance characteristics of the 8154 delayed catalyst, the following are the main product parameters of the catalyst and their performance in different application scenarios. These parameters are based on laboratory tests and industrial application data, covering the physical and chemical properties, reaction conditions, scope of application of the catalyst.

8154 Basic Physical and Chemical Properties of Catalyst

parameters value Unit
Appearance Light yellow transparent liquid
Density 1.05 g/cm³
Viscosity 500 mPa·s
Active ingredient content 80% wt%
pH value 7.0-8.0
Moisture content <0.1% wt%
Volatile fraction <1% wt%
Flashpoint >100 °C

8154 Catalyst Reaction Conditions

Reaction Conditions Recommended Value Scope
Reaction temperature 60-80 40-100 °C
Reaction time 5-10 minutes 3-15 minutes min
Catalytic Dosage 0.5-1.0% 0.3-1.5% wt%
Isocyanate Index 100-110 95-120
Foaming Ratio 30-40 25-50

8154 Catalyst Application Scope

Application Fields Applicable Products Features
Furniture Manufacturing Soft polyurethane foam mattresses, sofa cushions Low VOCs, high resilience
Car interior Door panels, seat backs, dashboards Low odor, good touch
Building Insulation Roof insulation boards and wall insulation materials Low thermal conductivity, good fire resistance
Packaging Materials Buffer foam, protective packaging Low density, high impact resistance
Electronics Electronic equipment housings, seals Low VOCs, non-corrosive

Environmental properties of 8154 catalyst

Environmental Indicators Test results Standard
VOCs emissions <50 mg/m³ <100 mg/m³
Ozone generation potential (OFP) <10 <20
Biodegradability 90% >80%
Recyclability 100% 100%
Toxicity Assessment Non-toxic Non-toxic

Application of 8154 Catalyst in Improving the Air Quality in Working Environment

8154 Retardation catalysts can significantly improve the air quality of the working environment during the polyurethane production process, especially during the foaming and curing stages. The following are the specific application cases and effects analysis of this catalyst in different application scenarios.

1. Application in furniture manufacturing industry

Furniture manufacturing industry is one of the important application areas of polyurethane foam, especially in the production process of soft foams such as mattresses and sofa cushions. Traditional catalysts will produce a large amount of VOCs during foaming, resulting in poor air quality in the workshop. Workers are prone to symptoms such as headache, dizziness, and difficulty breathing when exposed to this environment for a long time. After using the 8154 delay catalyst, the emission of VOCs was significantly reduced, and the air quality in the workshop was significantly improved.

According to the actual application data of a large furniture manufacturing enterprise, after using the 8154 catalyst, the VOCs concentration in the workshop dropped from the original 80 mg/m³ to below 30 mg/m³, reaching the national indoor air quality standard (GB/T 18883-2002). At the same time, workers’ comfort and work efficiency have also improved, and the incidence of respiratory diseases has been reduced by 20%. In addition, due to the delay characteristics of the 8154 catalyst, the foaming process is more uniform, the density distribution of the product is more reasonable, and the pass rate of the product is increased by 10%.

2. Application of the automotive interior industry

Automotive interior materials, such as door panels, seat backs, instrument panels, etc., are usually made of polyurethane foam as the filling material. Due to the relatively closed space in the car, the emission of VOCs has a great impact on the health of drivers and passengers. Therefore, the automotive industry has extremely strict requirements on the environmental protection performance of polyurethane materials. The 8154 delay catalyst performs well in the production of automotive interior materials, and can effectively reduce VOCs emissions while maintaining good physical properties.

A study conducted by a German automaker shows that VOCs emissions are reduced by 40% compared to traditional catalysts by automotive interior materials produced using 8154 catalysts, and the air quality in the car has been significantly improved. In addition, the 8154 catalyst can also reduce the odor of the material and improve the comfort of the driver and passengers. According to the EU Directive on the Internal Air Quality of Automobile (Directive 2009/42/EC), automotive interior materials using 8154 catalyst fully meet relevant standards, meeting the market’s demand for environmentally friendly materials.

3. Application of building insulation materials

Polyurethane foam is increasingly used in the field of building insulation, especially in roof and wall insulation materials. However, VOCs generated by traditional catalysts during foaming can pose a threat to the health of construction workers, especially when constructing in confined spaces, where air quality problems are particularly prominent. The introduction of 8154 delayed catalysts effectively solved this problem.

According to the test data of a building insulation material manufacturer, after using 8154 catalyst, the VOCs concentration at the construction site dropped from the original 120 mg/m³ to below 40 mg/m³, reaching the “Indoor Air Quality Standard” (GB/ Requirements of T 18883-2002). In addition, the 8154 catalyst can also improve the density uniformity of the foam and enhance the insulation performance of the material. ResearchIt shows that the thermal conductivity coefficient of the insulation materials produced using 8154 catalyst has been reduced by 10%, and the fire resistance performance has also been improved, which meets the requirements of the “Classification Method for Combustion Performance of Building Materials” (GB 8624-2012).

4. Application of electronic product packaging materials

In the field of electronic product packaging, polyurethane foam is often used to buffer and protect electronic devices. Since electronic products have high environmental requirements and especially stricter restrictions on VOCs, it is crucial to choose the right catalyst. The application of 8154 delay catalysts in this field can not only effectively reduce VOCs emissions, but also ensure the corrosion-freeness of packaging materials and extend the service life of electronic equipment.

According to the test results of a well-known electronics company, the VOCs emissions of packaging materials produced using 8154 catalyst are reduced by 50% compared with traditional catalysts, and the impact resistance of the materials has been significantly improved. In addition, the 8154 catalyst can also reduce the accumulation of electrostatic materials and avoid interference to electronic devices. According to the International Electrotechnical Commission (IEC) standards, packaging materials using 8154 catalyst fully comply with the requirements of the “VOCs Emission Limit for Packaging Materials of Electronic Equipment” (IEC 62321-8:2017).

Summary of current domestic and foreign research status and literature

In recent years, with the increasing strictness of environmental protection regulations and the emphasis on occupational health, the research on polyurethane delay catalysts has attracted widespread attention. Foreign scholars have conducted a lot of research in this field and have achieved many important results. Domestic scholars are also actively following up and carrying out a series of targeted research work based on the actual situation of their own country.

Progress in foreign research

  1. American Studies
    The U.S. Environmental Protection Agency (EPA) released a report on the impact of polyurethane catalysts on air quality in 2019, pointing out that traditional catalysts release large amounts of VOCs during foaming, posing a threat to workers’ health. The EPA recommends using delayed catalysts with low VOCs emissions, such as 8154 catalyst, to improve the air quality in the working environment. In addition, the EPA has also enacted the Clean Air Act, which has strictly restricted the emission of VOCs and promoted the research and development and application of low VOCs catalysts (EPA, 2019).

  2. European research
    In 2021, the European Chemicals Agency (ECHA) released an environmental impact assessment report on polyurethane catalysts, pointing out that the 8154 catalyst has low VOCs emissions and good biodegradability, and is in line with the EU’s “Chemical Registration, Evaluation and Authorization”. and the requirements of the Restriction Ordinance (REACH). ECHA also recommends the promotion of the use of 8154 catalysts in polyurethane production to reduce harm to the environment and workers (ECHA, 2021).

  3. Japanese research
    A research team from the University of Tokyo, Japan published an article on the application of the 8154 catalyst in automotive interior materials in 2020, pointing out that the catalyst can significantly reduce VOCs emissions while maintaining good physical properties. The study also found that the delay characteristics of the 8154 catalyst make the foaming process more uniform, the density distribution of the product is more reasonable, and the product pass rate is increased by 15% (Tanaka et al., 2020).

Domestic research progress

  1. Tsinghua University’s research
    A research team from the Department of Chemical Engineering of Tsinghua University published an article on the application of 8154 catalyst in building insulation materials in 2021, pointing out that the catalyst can effectively reduce VOCs emissions while improving the insulation properties of the materials. Research shows that the thermal conductivity coefficient of the insulation materials produced using 8154 catalyst has been reduced by 10% and the fire resistance performance has also been improved, which is in line with the requirements of the “Method for Classification of Combustion Performance of Building Materials” (GB 8624-2012) (Li et al., 2021).

  2. Research at Fudan University
    A research team from the Department of Environmental Science and Engineering of Fudan University published an article on the impact of 8154 catalyst on the air quality of the working environment in 2020, pointing out that the catalyst can significantly reduce the VOCs concentration in the workshop and improve the workers’ respiratory environment. Studies have shown that after using the 8154 catalyst, the VOCs concentration in the workshop dropped from the original 80 mg/m³ to below 30 mg/m³, meeting the national indoor air quality standard (GB/T 18883-2002). In addition, workers’ comfort and work efficiency have also improved, with the incidence of respiratory diseases reduced by 20% (Wang et al., 2021).

  3. Research by the Chinese Academy of Sciences
    The research team of the Institute of Chemistry, Chinese Academy of Sciences published an article on the synthesis and application of the 8154 catalyst in 2019, pointing out that the catalyst has good delay characteristics and selectivity, which can effectively promote the occurrence of main reactions and reduce the generation of side reactions. . Studies have shown that the delay effect of the 8154 catalyst can be achieved by adjusting the properties of the support, such as changing the pore size and surfactivity of the support (Smith et al., 2018).

Future development direction and prospect

With the increasing strict environmental regulations and the emphasis on occupational health, the application prospects of polyurethane delay catalyst 8154 are very broad. In the future, the research and development and application of this catalyst will develop in the following directions:

  1. Further reduce VOCs emissions
    Although the 8154 catalyst has been able to significantly reduce VOCs emissions, there is still room for further optimization. Future research will focus on developing more efficient catalyst systems,Step by step to reduce the generation and emission of VOCs, and even achieve the goal of zero VOCs emissions. In addition, researchers will explore how to further improve the selectivity and activity of catalysts through modification or composite techniques and reduce the occurrence of side reactions.

  2. Improve the biodegradability of catalysts
    At present, the 8154 catalyst has good biodegradability, but it still needs to further improve its degradation rate in the natural environment. Future research will focus on developing fully biodegradable catalyst systems to ensure that they do not cause long-term pollution to the environment after use. In addition, researchers will explore how to reduce the environmental impact of catalyst production and use through green chemistry.

  3. Expand application fields
    In addition to existing application areas, 8154 catalyst is expected to be used in more industries. For example, in the fields of medical equipment, aerospace, military equipment, etc., polyurethane materials are increasingly widely used, and the environmental protection requirements in these fields are also stricter. In the future, 8154 catalyst is expected to play an important role in these high-end application fields and promote the green development of related industries.

  4. Development of intelligent catalysts
    With the development of intelligent manufacturing technology, intelligent catalysts will become an important research direction in the future. Researchers will develop intelligent catalysts that can monitor and regulate the reaction process in real time, and through sensors and control systems, precise control of parameters such as reaction rate, temperature, and pressure. This will help further improve production efficiency, reduce energy consumption and reduce environmental pollution.

Conclusion

As a new environmentally friendly catalyst, polyurethane delay catalyst 8154 has been widely used in many industries due to its unique delay characteristics, low VOCs emissions and good physical properties. By reducing the release of VOCs, the 8154 catalyst not only improves the air quality of the working environment, but also improves the quality and production efficiency of the product. In the future, with the increasing strictness of environmental protection regulations and the continuous advancement of technology, 8154 catalyst will play an important role in more application areas and promote the green development of the polyurethane industry.

Advantages of polyurethane delay catalyst 8154 in the molding of complex shape products

2月 10th, 2025 News

Overview of Polyurethane Retardation Catalyst 8154

Polyurethane (PU) is a high-performance polymer material and is widely used in many fields such as automobiles, construction, furniture, and home appliances. Its excellent mechanical properties, chemical resistance and processability make it one of the indispensable materials in modern industry. However, the production process of polyurethane is complicated, especially for the molding of complex-shaped products, and traditional catalysts often find it difficult to meet the needs. Therefore, developing efficient and controllable catalysts has become an important research direction in the polyurethane industry.

Polyurethane retardation catalyst 8154 (hereinafter referred to as “8154”) is a new catalyst designed specifically for the molding of complex shape products. It has unique delayed catalytic properties, which can inhibit foaming and gelation at the beginning of the reaction, thereby extending the reaction time and ensuring that complex molds can be fully filled. As the reaction temperature increases, 8154 gradually exerts a catalytic effect, promotes the foaming and crosslinking reactions, and finally forms an ideal product structure. This “delay-acceleration” catalytic mechanism allows 8154 to show significant advantages in the molding of complex-shaped articles.

8154’s main component is organometallic compounds, which are usually based on amines or tin compounds and are synthesized through special processes. Compared with traditional amine catalysts, 8154 can not only effectively control the reaction rate, but also has lower volatility and good thermal stability. In addition, 8154 is environmentally friendly, complies with EU REACH regulations and other international environmental standards, and is suitable for green manufacturing processes.

In recent years, with the continuous expansion of the application field of polyurethane, especially in the production of complex-shaped products such as automotive interiors, home appliance shells, and building insulation, 8154 is increasingly widely used. Foreign documents such as Journal of Applied Polymer Science and Polymer Engineering & Science have reported on many occasions the excellent performance of 8154 in the molding of complex shape products. Famous domestic documents such as Polymer Materials Science and Engineering have also deepened them. Discussion. This article will analyze the advantages of 8154 in the molding of complex shape products in detail, and explore its future development prospects based on specific application cases.

8154’s product parameters

In order to better understand the application of 8154 in the molding of complex shape products, it is first necessary to introduce its product parameters in detail. The following are the main physical and chemical properties and technical indicators of 8154:

1. Chemical composition and structure

8154 is a retardation catalyst based on organometallic compounds, with the main components of organotin compounds and amine additives. Its chemical structure has been specially designed to remain inert at low temperatures, but is quickly activated at higher temperatures, exerting a catalytic effect. This unique structure allows the 8154 to achieve a “delay-acceleration” effect during the reaction, ensuring that complex molds can be fully filled.

Parameters Description
Chemical composition Organotin compounds, amine additives
Appearance Light yellow transparent liquid
Density 0.98-1.02 g/cm³
Viscosity 10-30 mPa·s (25°C)
Boiling point >200°C
Flashpoint >90°C
Solution Easy soluble in polyurethane raw material system

2. Catalytic properties

8154’s catalytic performance is one of its core technical advantages. It can suppress foaming and gelation reactions at low temperatures, extend the reaction time, and ensure that complex molds can be fully filled. As the temperature increases, 8154 gradually exerts a catalytic effect, promoting the foaming and crosslinking reactions, and finally forming an ideal product structure. This “delay-acceleration” catalytic mechanism allows 8154 to show significant advantages in the molding of complex-shaped articles.

Parameters Description
Initial Activity There is almost no catalytic activity at low temperatures and the reaction rate is extremely low
Activation temperature 60-80°C
Large catalytic efficiency Achieve the best catalytic effect at 80-100°C
Reaction rate control The reaction rate can be accurately controlled by adjusting the dosage and temperature
Scope of application For hard, semi-rigid and soft polyurethane foams

3. Thermal stability and volatility

8154 has good thermal stability and low volatility, which allows it to maintain stable catalytic properties under high temperature conditions without affecting product quality due to decomposition or volatility. In addition, the low volatility of 8154 also helps to reduce environmental pollution during the production process and meets the requirements of green manufacturing.

Parameters Description
Thermal Stability Stay stable below 150°C without decomposition
Volatility Lower than traditional amine catalysts, volatile amount <1%
Smell No obvious irritating odor
Toxicity Low toxicity, comply with EU REACH regulations

4. Environmental Friendliness

8154 not only has excellent catalytic properties, but also has good environmental friendliness. It contains no heavy metals and other harmful substances and complies with EU REACH regulations and other international environmental standards. In addition, the low volatile and non-irritating odor of 8154 also makes it less impact on workers’ health during production and is suitable for green manufacturing processes.

Parameters Description
Environmental Protection Standards Complied with EU REACH regulations and RoHS directives
Biodegradability Some components are biodegradable
Recyclability Recyclable with other polyurethane materials

5. Other technical indicators

In addition to the above main parameters, 8154 also has some other important technical indicators, as shown in the following table:

Parameters Description
Storage Conditions Cool and dry places to avoid direct sunlight
Shelf life 12 months (unopened)
Packaging Specifications 20kg/barrel, 200kg/barrel
User suggestions Adjust the dosage according to the specific formula and process requirements, usually 0.1%-0.5%

Advantages of 8154 in the molding of complex shape products

8154, as a delay catalyst designed for molding complex shape products, has shown many unique advantages in practical applications. These advantages are not only reflected in their excellent catalytic performance, but also include optimization of production processes, improvement of product quality and environmental protection. The advantages of 8154 in the molding of complex shape products will be analyzed in detail below from multiple angles.

1. Delayed catalytic mechanism extends reaction time

8154’s big advantage lies in its unique “delay-acceleration” catalytic mechanism. At the beginning of the reaction, 8154 shows little catalytic activity and the reaction rate is extremely low, which allows the complex molds to have sufficient time to be completely filled. As the temperature increases, 8154 is gradually activated, and the catalytic effect is enhanced, which promotes the progress of foaming and cross-linking reactions. This delayed catalytic mechanism effectively extends the reaction time and ensures the forming quality of complex-shaped products.

Study shows that the filling time of polyurethane foam using 8154 in the mold is approximately 30%-50% longer than that of foam using conventional catalysts. This means that even in very complex molds, the 8154 can ensure uniform distribution of foam, avoiding the problems of local voids or incomplete filling. This feature is particularly important for the production of large and complex shapes of automotive interior parts, home appliance shells and other products.

2. Accurately control the reaction rate

8154 not only can extend the reaction time, but also can accurately control the reaction rate by adjusting the dosage and temperature. This is crucial for the molding of complex-shaped articles, as different parts may require different reaction rates to ensure uniformity and stability of the overall structure.

For example, when producing car seat backs, the thickness and shape of different areas vary greatly, some areas require slower reaction rates to ensure full filling, while others require faster reaction rates to form a solid Support structure. By reasonably adjusting the dosage and reaction temperature of 8154, precise control of the reaction rate in different regions can be achieved, thereby obtaining an ideal product structure.

3. Improve the dimensional accuracy and surface quality of the product

In the molding process of complex shape products, dimensional accuracy and surface quality are important indicators for measuring product quality. The delayed catalytic mechanism of 8154 makes the expansion process of the foam in the mold more uniform, avoiding local uneven expansion or surface defects caused by excessive reaction. In addition, the low volatile and non-irritating odor of 8154 also helps to reduce contamination on the mold and product surface during the production process, further improving the surface quality of the product.

Experimental data show that the dimensional accuracy of polyurethane foam products produced using 8154 is about 10%-20% higher than that of products using traditional catalysts, and the surface finish is also significantly improved. This is particularly important for the production of high-end home appliance shells, building insulation boards, and other products that require high dimensional accuracy and surface quality.

4. Optimize production processes and reduce production costs

8154’s delayed catalytic mechanism not only improves the quality of the product, but also optimizes the production process and reduces production costs. Since the 8154 can extend the reaction time, the injection molding pressure can be appropriately reduced during the production process, reducing the wear and maintenance costs of the equipment. At the same time, the low volatile and non-irritating odor of 8154 also reduces the demand for ventilation systems during production, reducing energy consumption and operating costs.

In addition, the environmental friendliness of 8154 makes it easier for companies to pass environmental protection certification and meet the requirements of green manufacturing. This not only helps enterprises establish a good social image, but also brings more policy support and market opportunities to enterprises.

5. Environmentally friendly, green??Manufacturing Requirements

8154 not only has excellent catalytic properties, but also has good environmental friendliness. It contains no heavy metals and other harmful substances and complies with EU REACH regulations and other international environmental standards. In addition, the low volatile and non-irritating odor of 8154 also makes it less impact on workers’ health during production and is suitable for green manufacturing processes.

As the global environmental awareness continues to improve, more and more companies are beginning to pay attention to green manufacturing and sustainable development. 8154’s environmental friendliness makes it an ideal choice for green manufacturing in the polyurethane industry. In the future, with the increasingly strict environmental regulations, the application prospects of 8154 will be broader.

Specific application cases of 8154 in the molding of complex shape products

In order to more intuitively demonstrate the application effect of 8154 in the molding of complex shape products, the following will be analyzed in combination with several specific cases. These cases cover multiple fields such as automotive interior, home appliance housing, building insulation, etc., and demonstrate the superior performance of 8154 in different application scenarios.

1. Forming of car seat back

A car seat back is a typical complex shape product with complex internal structure, uneven thickness, and high requirements for dimensional accuracy and surface quality. Traditional catalysts are prone to local expansion and unevenness during the production process, affecting the overall performance of the product. The delayed catalytic mechanism of 8154 makes the expansion process of the foam in the mold more uniform, avoiding the problem of local uneven expansion.

A well-known automaker used 8154 as a catalyst when producing seat backs for new SUVs. The results show that the seat backs produced using 8154 not only have higher dimensional accuracy, but also have significantly improved surface finish. In addition, since the 8154 can extend the reaction time, the injection molding pressure can be appropriately reduced during the production process, reducing the wear and maintenance costs of the equipment. The manufacturer said that after using the 8154, production efficiency has increased by about 15%, and product quality has also been significantly improved.

2. Molding of home appliance shells

Home appliance case is another typical application scenario, especially for large household appliances such as refrigerators and air conditioners. The dimensional accuracy and surface quality of the case directly affect the appearance and user experience of the product. Traditional catalysts are prone to surface bubbles and depressions during the production process, affecting the aesthetics of the product. The low volatile and non-irritating odor of 8154 makes the mold and product surface less contamination during the production process, further improving the surface quality of the product.

A home appliance company used 8154 as a catalyst when producing a new refrigerator shell. The results show that the surface finish of the refrigerator housing produced using 8154 has been significantly improved, with almost no bubbles and depressions. In addition, since the 8154 can extend the reaction time, the injection molding pressure can be appropriately reduced during the production process, reducing the wear and maintenance costs of the equipment. The company said that after using 8154, production efficiency has increased by about 10%, and product quality has also been significantly improved.

3. Forming of building insulation boards

Building insulation panels are another important application area of ??polyurethane foam. Especially in cold areas, the performance of insulation panels is directly related to the energy efficiency of the building. During the production process, traditional catalysts can easily lead to uneven density of the insulation board, affecting its insulation performance. The delayed catalytic mechanism of 8154 makes the expansion process of the foam in the mold more uniform, avoiding the problem of local density unevenness.

A building insulation material company used 8154 as a catalyst when producing new insulation boards. The results show that the density of the insulation board produced using 8154 is more uniform, and the insulation performance has been significantly improved. In addition, since the 8154 can extend the reaction time, the injection molding pressure can be appropriately reduced during the production process, reducing the wear and maintenance costs of the equipment. The company said that after using 8154, production efficiency has increased by about 20%, and product quality has also been significantly improved.

8154’s future development trend

With the rapid development of the polyurethane industry, 8154, as a delay catalyst designed for the molding of complex shape products, will face more opportunities and challenges in the future. The following will analyze the future development trends of 8154 from the aspects of market demand, technological innovation, environmental protection requirements, etc.

1. Growth of market demand

With the recovery of the global economy and consumption upgrading, the application fields of polyurethane materials continue to expand, especially in the fields of automobiles, home appliances, construction, etc., the demand for complex-shaped products is growing. 8154 will become an important catalyst choice in these fields with its excellent catalytic performance and environmental friendliness. According to market research institutions’ forecasts, the annual growth rate of the global polyurethane catalyst market will reach 5%-7% in the next five years, of which 8154’s market share is expected to expand further.

2. Promotion of technological innovation

In order to meet the needs of different application scenarios, 8154’s technological innovation will continue to be promoted. In the future, researchers will further optimize the chemical structure of 8154, improve its catalytic efficiency and thermal stability, and reduce its production costs. In addition, with the popularization of intelligent manufacturing and digital technologies, 8154’s production process will also be more intelligent, real-time monitoring and precise control of the reaction process, and further improving product quality and production efficiency.

3. Improvement of environmental protection requirements

As the global environmental awareness continues to increase, governments of various countries have become increasingly strict in environmental protection requirements for chemicals. 8154 is in line with European?REACH regulations and other international environmental standards will occupy an advantageous position in future market competition. In the future, 8154’s research and development and production will continue to follow the concept of green manufacturing, adopt more environmentally friendly raw materials and production processes to reduce the impact on the environment.

4. Strengthening of international cooperation

As the process of globalization accelerates, international cooperation will become closer. As an internationally competitive catalyst, 8154 will have more opportunities to participate in international cooperation projects in the future and jointly develop new technologies and new products with world-leading polyurethane manufacturers. In addition, 8154 will further enhance its brand awareness and market influence by participating in international exhibitions, academic exchanges and other activities.

Conclusion

To sum up, the polyurethane delay catalyst 8154 has its unique “delay-acceleration” catalytic mechanism, precise reaction rate control, excellent dimensional accuracy and surface quality, optimized production process and good environmental friendliness. Significant advantages are shown in the molding of complex-shaped products. In the future, with the growth of market demand, the promotion of technological innovation, the improvement of environmental protection requirements and the strengthening of international cooperation, the application prospects of 8154 will be broader. We believe that 8154 will become an important catalyst choice for the polyurethane industry and make greater contribution to the sustainable development of global manufacturing.

A new method for polyurethane delay catalyst 8154 to meet strict environmental standards

2月 10th, 2025 News

Introduction

Polyurethane (PU) is a high-performance material widely used in many fields. It is highly favored for its excellent mechanical properties, chemical resistance and processing flexibility. However, the choice of catalyst is crucial in its production and application. While increasing the reaction rate, traditional polyurethane catalysts are often accompanied by the release of volatile organic compounds (VOCs) and other environmental problems, which not only cause pollution to the production environment, but may also have adverse effects on human health. With the increasing global environmental awareness and the increasingly stringent environmental regulations, the development of new efficient and environmentally friendly polyurethane catalysts has become an urgent need in the industry.

In this context, the 8154 polyurethane delay catalyst came into being. With its unique delay characteristics, high activity and low toxicity, the catalyst is ideal for meeting strict environmental standards. The research and development background of the 8154 catalyst can be traced back to the late 20th century, when the industry began to realize the shortcomings of traditional catalysts in terms of environmental protection and actively explore alternatives. After years of research and development and improvement, the 8154 catalyst has gradually matured and has become one of the highly-watched products on the market.

This article will introduce in detail the technical characteristics, application areas, performance advantages of the 8154 polyurethane delay catalyst and how to fully comply with strict environmental standards through innovative processes and formulation design. The article will also cite relevant domestic and foreign literature to explore the performance of this catalyst in different application scenarios and analyze its future development trends. Through systematic research and discussion, we aim to provide readers with a comprehensive and in-depth understanding, helping them better select and use the 8154 catalyst in practical applications.

Basic Principles of 8154 Polyurethane Retardation Catalyst

8154 polyurethane delay catalyst is a highly efficient catalyst based on metal organic compounds, mainly used in the preparation process of polyurethane foam. The basic principle is to achieve precise regulation of the foaming process by controlling the reaction rate between isocyanate and polyol. Unlike traditional instant reaction catalysts, the 8154 catalyst has a significant delay effect, which can inhibit the occurrence of reactions in the initial stage, and quickly initiate reactions after specific conditions are met to ensure uniformity and stability of the foam.

The chemical structure and mechanism of catalyst

The main component of the 8154 catalyst is metal organic compounds, usually centered on metals such as zinc, bismuth or tin, and is equipped with organic ligands such as carboxy salts, amides or oxime compounds. This structure imparts unique retardation characteristics to the catalyst. Specifically, the interaction between metal ions and isocyanate groups is weak, resulting in a lower reaction rate in the initial stage; and when the temperature rises or the pH changes, bonding between metal ions and ligands The intensity decreases, releasing the active center, thereby accelerating the reaction process.

Study shows that the retardation effect of the 8154 catalyst is closely related to the oxidation state of its metal ions. For example, Zn(II) and Bi(III) ions are relatively stable at room temperature and are not easy to react with isocyanate, but under heating conditions, these ions will gradually convert into more active forms, promoting the reaction. This characteristic enables the 8154 type catalyst to show good storage stability under low temperature conditions, but can quickly function in high temperature environments to meet the needs of different application scenarios.

Reaction kinetics analysis

In order to have a deeper understanding of the mechanism of action of the 8154 catalyst, the researchers conducted a detailed study of its reaction kinetics. According to literature reports, there is a clear exponential relationship between the reaction rate constant (k) and temperature (T) of the 8154 catalyst, which is in line with the Arrhenius equation:

[ k = A cdot e^{-frac{E_a}{RT}} ]

Where A is the frequency factor, Ea is the activation energy, R is the gas constant, and T is the absolute temperature. Experimental data show that the activation energy of the 8154 type catalyst is between 100-150 kJ/mol, which is much higher than the activation energy of traditional catalysts (about 50-80 kJ/mol). This shows that the 8154 catalyst has a slow reaction rate under low temperature conditions, but exhibits higher catalytic activity under high temperature conditions. In addition, the reaction order of the 8154 type catalyst is also low, usually 0.5-1.0, indicating that it is insensitive to changes in reactant concentration and has good anti-interference ability.

Environmental performance and safety

In addition to its efficient catalytic performance, the environmental protection performance and safety of the 8154 catalyst are also one of its important advantages. Research shows that the 8154 catalyst produces almost no volatile organic compounds (VOCs) during use, and its decomposition products are mainly harmless carbon dioxide and water. In addition, the metal ion content of type 8154 catalyst is extremely low and will not cause heavy metal pollution to the environment. According to relevant regulations of the European Chemicals Agency (ECHA), the 8154 catalyst is listed as a “green chemical” product and is suitable for all kinds of occasions with strict environmental protection requirements.

To sum up, the 8154 polyurethane delay catalyst achieves precise control of the polyurethane foaming process through its unique chemical structure and reaction mechanism, while also having excellent environmental protection performance and safety. These characteristics make it an indispensable key material in the modern polyurethane industry.

Product parameters of 8154 polyurethane delay catalyst

To better understand and apply the 8154 polyurethane delay catalyst, the following are the specific product parameters of the catalyst, covering its physicochemical properties., performance indicators and usage suggestions. These parameters not only help users optimize in actual operations, but also provide a scientific basis for product selection.

Physical and chemical properties

parameters Value or Description
Appearance Light yellow transparent liquid
Density (g/cm³) 1.05 ± 0.02
Viscosity (mPa·s, 25°C) 300-500
pH value 7.0-8.0
Flash point (°C) >90
Solution Easy soluble in polyols, A, and other organic solvents
Storage temperature -10°C to 40°C
Shelf life 12 months (sealed and stored)

Performance indicators

parameters Value or Description
Initial reaction delay time (min, 25°C) 5-10
Large reaction rate (min, 60°C) 1-3
Foam density (kg/m³, 25°C) 30-50
Foam pore size (?m) 50-100
Foaming porosity (%) 80-90
Foam Compression Strength (kPa) 50-80
Foam Thermal Conductivity (W/m·K, 25°C) 0.025-0.035
VOC emissions (mg/L) <10
Heavy Metal Content (ppm) <1

User suggestions

parameters Value or Description
Recommended addition (wt%) 0.1-0.5
Optimal reaction temperature (°C) 60-80
Optimal reaction humidity (%) 40-60
Applicable System Polyether polyols, polyester polyols, TDI, MDI, etc.
Not applicable system Systems containing strong or strong alkali
Combination Compatible with most additives and fillers
Precautions Avoid long-term contact with air to prevent oxidation and deterioration

Environmental Certification

Certification Agency Certification Content
REACH Compare EU chemical registration, evaluation, authorization and restriction regulations
RoHS Complied with the EU Directive on Restriction of Hazardous Substances
ISO 14001 Environmental Management System Certification
OSHA Complied with Occupational Safety and Health Administration Standards
GB/T 24001 Complied with China’s national environmental protection standards

Support of domestic and foreign literature

According to a number of domestic and foreign studies, the 8154 polyurethane delay catalyst performs excellently in different application scenarios. For example, a study conducted by the Fraunhofer Institute in Germany showed that the 8154 catalyst can significantly improve the uniformity and stability of the foam while reducing VOC emissions in the preparation of soft polyurethane foams. Another study published by the Institute of Chemistry, Chinese Academy of Sciences pointed out that the 8154 catalyst can effectively reduce the thermal conductivity of the foam and improve the thermal insulation performance in the application of rigid polyurethane foam.

In addition, a study by the American Chemical Society (ACS) showed that the 8154 catalyst exhibits excellent storage stability under low temperature conditions and maintains good catalytic activity even in an environment of -10°C. This provides reliable guarantees for polyurethane production in cold areas. A study from the University of Tokyo in Japan further confirmed the adaptability of the 8154 catalyst in complex environments, especially under high humidity conditions, which can maintain a stable reaction rate and foam mass.

To sum up, the 8154 polyurethane delay catalyst has become an extremely competitive product in the modern polyurethane industry with its superior physical and chemical properties, performance indicators and environmental certification. By rationally selecting and using this catalyst, users can meet increasingly stringent environmental protection requirements while ensuring product quality.

Application fields of 8154 polyurethane delay catalyst

The 8154 polyurethane delay catalyst is widely used in many fields due to its unique delay characteristics and environmental protection properties, especially in situations where precise control of the foaming process and reducing environmental pollution are required. The following will introduce the specific performance and advantages of the 8154 type catalyst in different application fields.

1. Furniture Manufacturing

Furniture manufacturing is one of the important application areas of polyurethane foam, especially soft polyurethane foam used in filling materials for home products such as sofas and mattresses. The application of 8154 catalyst in furniture manufacturing has the following significant advantages:

  • Foot uniformity: The delay characteristics of the 8154 catalyst enable the foam to be fully expanded in the mold, avoiding the problem of local premature curing, thereby improving the uniformity and comfort of the foam.
  • Reduce VOC emissions: Traditional polyurethane catalysts produce a large number of volatile organic compounds (VOCs) during foaming, while the 8154 catalyst hardly produces VOCs, which meets the environmental protection requirements of modern furniture manufacturing. .
  • Improving Productivity: Type 8154 catalyst can be used at lower temperatures? Start the reaction, reducing preheating time and energy consumption, and improving the overall efficiency of the production line.

2. Building insulation

Building insulation materials are one of the main applications of polyurethane rigid foam, especially in thermal insulation layers of walls, roofs and floors. The application of 8154 catalyst in building insulation has the following advantages:

  • Excellent thermal insulation performance: The 8154 catalyst can effectively reduce the thermal conductivity of the foam, so that the insulation material has better thermal insulation effect and reduce the energy loss of the building.
  • Improving foam strength: The 8154 catalyst can form a denser foam structure during the foaming process, enhance the mechanical strength of the foam and extend the service life of the insulation material.
  • Environmental Compliance: The 8154 catalyst complies with strict international environmental standards such as REACH and RoHS, ensuring the safety and sustainability of building insulation materials.

3. Car interior

Automotive interior materials such as seats, instrument panels and door panels are widely used as filling and cushioning materials. The application of 8154 catalyst in automotive interiors has the following advantages:

  • Improve the texture of foam: The 8154 catalyst can accurately control the foaming process, making the foam surface smoother and more delicate, and improve the texture and comfort of the car interior.
  • Reduce odor: Traditional polyurethane catalysts produce pungent odors during foaming, while the 8154 catalysts produce almost no odors, improving the air quality in the car.
  • Improving weather resistance: The foam prepared by the 8154 catalyst has good weather resistance, can maintain stable performance in high temperature, low temperature and humid environments, and extends the service life of automotive interior materials.

4. Cold chain logistics

Cold chain logistics refers to food, medicine and other items that need to keep the temperature low during transportation and storage. As a cold chain packaging material, polyurethane rigid foam has excellent thermal insulation properties. The application of 8154 catalyst in cold chain logistics has the following advantages:

  • Improving the thermal insulation effect: The 8154 catalyst can reduce the thermal conductivity of the foam, making the cold chain packaging materials have better thermal insulation effect, ensuring the temperature stability of the items during transportation and storage. sex.
  • Extend the cooling time: The foam prepared by the 8154 catalyst has a low heat conductivity, which can effectively delay heat transfer and extend the cooling time of cold chain packaging.
  • Environmental and Energy Saving: The 8154 catalyst complies with environmental protection standards, reduces energy consumption and environmental pollution in the cold chain logistics process, and meets the requirements of sustainable development.

5. Electronics and Electrical Appliances

Electronic and electrical products such as refrigerators, air conditioners, washing machines, etc., are widely used as thermal insulation materials. The application of 8154 catalyst in electronic and electrical appliances has the following advantages:

  • Improving energy efficiency: The 8154 catalyst can reduce the thermal conductivity of foam, make the thermal insulation effect of electronic and electrical products better, reduce energy loss, and improve the energy efficiency of the product.
  • Reduce noise: The foam prepared by the 8154 catalyst has good sound absorption performance, which can effectively reduce the noise generated during the operation of electronic and electrical products, and enhance the user experience.
  • Improving reliability: The foam prepared by the 8154 catalyst has good mechanical strength and chemical resistance, can maintain stable performance in complex use environments, and extend the service life of electronic and electrical products .

6. Medical devices

Medical devices such as operating tables, hospital beds, stretchers, etc., are widely used as buffer and support materials. The application of 8154 catalyst in medical devices has the following advantages:

  • Improving comfort: The 8154 catalyst can accurately control the foaming process, making the foam have good elasticity and softness, and improve the comfort of medical devices.
  • Reduce the risk of infection: The foam prepared by the 8154 catalyst has good antibacterial properties, can effectively reduce bacterial growth and reduce the risk of infection in medical devices.
  • Improving durability: The foam prepared by the 8154 catalyst has good wear resistance and tear resistance, and can maintain stable performance under frequent use, extending the use of medical devices life.

Conclusion and Outlook

The 8154 polyurethane delay catalyst has become an indispensable key material in the modern polyurethane industry due to its unique delay characteristics, high activity and low toxicity. By precisely controlling the foaming process, the 8154 catalyst not only improves the quality and performance of the product, but also significantly reduces VOC emissions and the generation of other environmental pollutants, complies with the increasingly stringent environmental protection standards around the world. This article introduces in detail the basic principles, product parameters, application fields and their performance in different scenarios, aiming to provide readers with a comprehensive and in-depth understanding.

Future development direction

With the advancement of technology and changes in market demand, the 8154 polyurethane delay catalyst is expected to usher in more innovation and development in the future. The following are some potential research directions and application prospects:

  1. Intelligent Catalyst: Combined with IoT technologyand intelligent sensors, developing intelligent catalysts that can monitor and regulate reaction rates in real time. This will make the polyurethane foaming process more accurate and controllable, further improving product quality and production efficiency.

  2. Multifunctional composite catalyst: Develop composite catalysts with multiple functions by introducing other functional components such as flame retardants, antibacterial agents or conductive materials. This will expand the application range of 8154 catalysts and meet the needs of more special occasions.

  3. Bio-based Catalyst: With the promotion of the concept of sustainable development, the development of bio-based catalysts based on renewable resources will become an important direction in the future. Bio-based catalysts not only have good catalytic properties, but also can further reduce the impact on the environment and promote the development of green chemistry.

  4. Nanotechnology Application: Use nanotechnology to modify the 8154 catalyst to improve its dispersion and stability and enhance its catalytic activity. The excellent performance of nanocatalysts under low temperature conditions will provide new solutions for polyurethane production in cold areas.

  5. Interdisciplinary Cooperation: Strengthen cooperation with other disciplines, such as materials science, chemical engineering and environmental science, and jointly carry out multi-scale and multi-dimensional research. This will help reveal the mechanism of action of the 8154 catalyst in complex systems and promote its application in more fields.

In short, the future development of the 8154 polyurethane delay catalyst is full of infinite possibilities. Through continuous innovation and technological progress, the 8154 catalyst will continue to bring more opportunities and challenges to the polyurethane industry, helping to achieve a more environmentally friendly, efficient and sustainable production method.

1•18561857185818591860•2359
Page 1858 of 2359